Exterior Wash 100-200-300 Series Torque Values IP Torque Cover Values
Written by Will Fraser
Updated at January 15th, 2026
Question:
What is the correct torque values for the cover screws?
Answer:
Front cover:
M4x16 screws for EW100 - EW200 - EW300 front cover in a star pattern torque to 1Nm / 0.74 ft-lbs.
Rear cover:
M4x16 screws for EW100 - EW200 - EW300 rear housing in a star pattern torque to 1Nm / 0.74 ft-lbs.
Fixture bracket:
M4x16 screws for EW100 - EW200 - EW300 fixture bracket Torque to 4Nm / 2.95 ft-lbs.
Cable gland inside nut:
Internal nut of all cable glands Torque to 1Nm / 0.74 ft-lbs.
Cable gland cap:
EW100 - EW200 - EW300 DMX cable
Torque M16 cable gland cap to 4Nm / 2.95 ft-lbs.
EW100 - EW200 - EW300 US power cable
Torque M12 cable gland cap to 3Nm / 2.21 ft-lbs.
EW100 - EW200 - EW300 EU power cable
Torque M12 cable gland cap to 2Nm / 1.47 ft-lbs.
Goretex valve:
Pressure relief valve for EW100 - EW200 - EW300
Torque to 1Nm / 0.74 ft-lbs.
