Convert Any G4 Touch Panel File to G5
Written by Will Fraser
Updated at January 9th, 2026
Table of Contents
Overview:
The G4 utility in TPDesign5 will only convert from G4 Modero X and S series touch panels (MX* or MS*). There is an extra step in the process to convert from an MVP or NXx series panel. If you do not have TPDesign4 and/or TPDesign5, please download and install. TPDesign4 and 5 will coexist and can run simultaneously.
In TPDesign4:
- Within TPDesign4 open the original panel, then 'Save As Different Panel Type.'
- Select a MX* or MS* panel type, determine scaling options, create new file name and save.
- If there is any confusion as to which panel to save-as just select MXD-1000 every time.
- First verify the newly converted panel file is satisfactory within TPDesign4.
- Afterward, exit TPDesign4 or at least close the panel file.
In TPDesign5:
- In TPDesign5, select G4utillity
- Select the panel file to convert to G5.
