Using Turntables with Ui Mixers

Table of Contents

Question: Answer:

Question:

How do I connect a turntable or record player to my Soundcraft Ui mixer?

Answer:

The output level or voltage from a turntable or record player is very small, in fact too small for the mixer to pickup. Therefore you will need to use a separate device called a Phono Preamplifier (some turntables have this built in) to boost the voltage high enough for the mixer. You will then plug the output of the Phono Preamp into the Line In jacks (RCA connectors) on the front of your mixer. Once plugged in, you will need to turn up the level of the Line In on your mixer to an adequate playback level.