SDX Solecis 4K Series Digital Switcher Firmware
Table of Contents
Question:
SDX Solecis 4K Series Digital Switcher Firmware
Answer:
Products Include:
FG1010-355 (SDX-514M-DX)
FG1010-314 (SDX-414-DX)
Release Date: 7/27/2018
Firmware Version: v2.1.38
PREVIOUS Version:
Release Date: 12/07/2016
Firmware Version: v2.1.34
1. Prerequisites
2. Features added in this release
3. Fixes in this release:
4. Known Issues
5. Programming Information
6. Notable Points
----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------
- Directly connected DX-RX must use v1.13.34 (or later).
- Directly connected DX-RX-4K must use v2.2.21 (or later).
- Enova DGX 800/1600/3200/6400 must have v3.2.19 (or later)
- The DGX 100 Series Master FW should be v1.4.90 (or later)
- The DVX Switcher Series FW should be v1.6.76 (or later)
- NetLinx Studio v4.3.1519 (or later)
----------------------------------------------------------
2. Features added in this release:
----------------------------------------------------------
- None
v2.1.34
- None
----------------------------------------------------------
3. Fixes in this release:
----------------------------------------------------------
- Fixed audio randomly causing too many messages to be sent
via pdif communication bus
v2.1.34
- None
----------------------------------------------------------
4. Known Issues
----------------------------------------------------------
- ICSLAN ports are not disabled when dipswitch 1 is OFF and
the TX is connected to a DGX.
----------------------------------------------------------
5. Programming Information
----------------------------------------------------------
----------------------------------------------------------
6. Notable Points
----------------------------------------------------------
- Please read the documentation in regard to the DIP
switches located on the front or rear of the SDX unit
before attempting to connect to the network.
Downloads:
Table of Contents