Question: How long can the HUB4000Q take to obtain an IP address at first start‑up? Answer: Initial DHCP or AutoIP.......

​Question: Which IP range does the HUB4000Q use when falling back to AutoIP? Answer: AutoIP assigns an address between 169.254.1.1.......

Question: How much current does the HUB4000Q draw? Answer: Its maximum current consumption is about 200 mA.....

Question: Which cables should I use to connect AKG devices to the hub? Answer: Always use the supplied RJ‑11 data.......

Question: Why should I leave all four DIP switches off for normal operation? Answer: The all‑off position lets the hub.......

Question: Is a DHCP router necessary in a HiQnet network with the hub? Answer: While not mandatory, a DHCP router.......

Question: Which Ethernet cable is required when connecting the hub directly to a PC? Answer: Use a crossover Ethernet cable.......

Question: What does it mean when System Architect asks for a hub firmware update? Answer: You should proceed with the.......

Question: Why create a Master Control Panel in System Architect? Answer: ​It combines several hubs so you can control every.......

Question: How many AKG wireless devices can one HUB4000Q interface support? Answer: A single HUB4000Q lets you daisy‑chain up to.......

Question: What kind of Ethernet port does the HUB4000Q need? Answer: It must be plugged into a 10 Mbit half‑duplex Ethernet.......

Question: Within what ambient temperature range will the HUB4000Q operate safely? Answer: The specified range is –10 °C to +60 °C.....

Question: Which color shows that the hub is switched on? Answer: The status LED glows green whenever the unit is.......

Question: What power adapter does the HUB4000Q use? Answer: Operate it only with a regulated 12 V DC, 500 mA supply.....

Question: How do I expand the system beyond eight channels? Answer: By networking several hubs through standard switches or routers.......

Question: What do the blue slot LEDs indicate? Answer: Off means no device, solid means a device is connected, and.......

Question: Does the hub remember its IP settings after the first boot? Answer: Yes - the address is stored so.......

Question: Which control surfaces can access the HUB4000Q? Answer: You can manage it from Harman System Architect, the AKG Wireless.......

Question: What are the minimum computer specifications to run Harman System Architect with the hub? Answer: System Architect needs a.......

Question: Can I monitor the HUB4000Q with a smartphone? Answer: Yes - the free AKG Wireless iPhone app lets you.......

Question: How should I set the DIP switches on the AB4000 EW to get the right gain? Answer: The AB4000.......

Question: What are the part numbers for the WMS rack mount kits? Answer: 7615H06110 - RMU40MINI Rack mount unit for.......

Question: Can I connect two or more AB4000 EW to get more gain? Answer: Yes. A maximum of three AB4000.......