Question:  

​​​​​How do I set up my PCM 92/96 to work with my footswitch?

Answer:

In order to use an external footswitch with a PCM92/96, you must be in the user presets group/category. In order to get there follow the instructions below. We recommend using the Digitech FS3X footswitch.

1. Make sure you are viewing a preset at the top most menu level. When viewing a preset, the bottom left corner of the display will read “(System View)".
2. Press the BACK button. The “Preset Category Selection" screen will be on the menu.
3. Scroll down to the bottom of this menu and select “User".
4. If all of your user presets are empty, you will need to add them here. Whenever a preset is stored, it is automatically placed in the user preset library. Presets placed in the user library cannot be deleted, only overwritten. 
5. Once you are in the top most menu level of the user library, press the SELECT knob to bring up the “System Menu" screen.
6. Scroll down this menu and select “Footswitch setup".
7. In the “Foot Switch Assignments" menu, select the parameter you would like to assign to your footswitch.
8. The screen will read “Please press the switch for (parameter here)".
9. Press the switch on your footswitch that you would like mapped to this parameter.
10. The screen will register that you assigned the parameter to your footswitch.
11. Once completed, press the BACK button until you are back at the top most menu level and your footswitch will be ready to use.