1x Signature Plus Mixer
1x Power Cable
1x Quick Start Guide
 

Mixer Overview | Soundcraft Signature Plus Series

On the Signature Plus 12, 16, and 22 mixers, Phantom Power is activated simultaneously across all channels.

To enable Phantom Power, use the GLOBAL 48V Phantom toggle button.  When Phantom Power is active, the button will remain pressed in, and a red LED indicator will illuminate to confirm that the setting is enabled.

On the Signature Plus 32, Phantom Power is activated in two groups:

•    48V Phantom 1-10: Engaging this button turns on 48V Phantom Power for input channels 1 to 10.
•    48V Phantom 11-29: Engaging this button turns on 48V Phantom Power for input channels 11 to 29 and the Talkback Ghost mic preamp.  
 

No.  The Signature Plus Series does not feature a Standby Mode.

The gain range is +6 dB to +65 dB.
 

The PAD value is -18 dB.

The Signature Plus Series provides dedicated filtering and EQ controls that allow you to shape the tonal balance of each channel and remove unwanted low-frequency content.

• High-Pass Filter (HPF): Fixed at 100 Hz.
• High-Frequency (HF) EQ: Fixed at 12 kHz.
• Mid-Frequency (MF) EQ: Adjustable from 150 Hz to 3 kHz.
• Low-Frequency (LF) EQ: Fixed at 60 Hz.

The Signature Plus Series features dbx OverEasy one-knob compression for convenient dynamic control. 

Compressor Specifications

The available routing options are:

• Mix
• Group 1–2
• Group 3–4

For additional information, please visit the following article:
Main Mix & Groups | Soundcraft Signature Plus Series

The Solo/Listen function isolates the selected channel signal in the headphones without affecting the main mix, unless the signal has been routed differently. 

If the “Talkback” button is pressed twice rapidly, Talkback remains enabled until the button is pressed again. 

Talkback provides routing for the “Talkback” signal to selected outputs, making communication with performers or other destinations easier during a performance or recording session.

For additional information, please visit the following article:
Talkback Mic Input | Soundcraft Signature Plus Series

The DIM function attenuates the monitor signal by -12 dB.

The Signature Plus Series provides flexible auxiliary routing for creating monitor mixes and sending audio to other auxiliary destinations.

• Aux sends: 4
• Mix to Auxes: Allows the main mix to be conveniently routed to the auxiliary outputs.

For additional information, please visit the following article:
Aux & Monitor Mixes | Soundcraft Signature Plus Series

The Signature Plus mixer supports Tap Tempo, FX Bypass, and compatible footswitch control through two dedicated TS jack connections.

• Tap Tempo lets you synchronize the timing of supported effects, such as delays, with your performance.  
  The TAP TEMPO Footswitch can be used to set the tempo by tapping the pedal, with the mixer calculating the tempo based on the time between the last two taps.
   
• FX Bypass allows the effects processor to be quickly bypassed when needed. 
  The FX MUTE Footswitch can be used to remotely mute the FX return.
   

Yes.  The Signature Plus Series features an integrated 4×4 USB-C audio interface. 

The USB interface allows the mixer to send and receive audio with a compatible computer and DAW. 
 

USB INT routes the master signal to the USB channels for recording purposes.

The USB audio interface operates from 44.1kHz to 192kHz.

USB supports 4 inputs and 4 outputs, divided into two channel groups:

• USB Channels 1–2
• USB Channels 3–4

For additional information, please visit the following article:
USB Inputs & Outputs | Soundcraft Signature Plus Series

A USB-C high-speed data cable is required for reliable audio transmission.  
If the USB connection intermittently cuts out, verify that the cable supports high-speed data and is properly connected.

1. Connect the mixer to the computer using a USB-C high-speed data cable, then select the Signature Plus USB audio device in your DAW's audio settings.
    
2. Configure the desired USB input channels as recording inputs in the DAW and assign the required DAW outputs to the corresponding USB return channels on the mixer.

For multichannel recording, select the appropriate USB channels 1–2 or 3–4 as the DAW's input and output channels. 

Yes.  The mixers include an integrated Lexicon effects processor.

For additional information, please visit the following article:
Lexicon FX Processor | Soundcraft Signature Plus Series

Select the desired FX using the encoder and adjust the Tempo as required.  Press and hold the “STORE” button to save the settings.

When the effect is recalled, the saved Tempo will also be recalled.

Rotate the FX encoder to switch between FX Group A and FX Group B.

Yes.  Registering the product provides access to a complimentary software bundle. 

The software bundle includes:

• Ableton Live 12 Lite
• Lexicon MPX Plug-in
• Lexicon LXP Plug-in
• FLUX:: EVO Series Pack Plug-in
• FLUX:: MiRA Session Metering

Warranty Period is 3 years.

Find contact information for regional support groups or authorized distributors along with warranty information for the following website:
HARMAN Professional Support