Question:

What commands are available for the PR-WP-412?

Answer:

General Commands

? Or help                    Prints help menu

ping                            Ping to specified IP address

fwversion                    Request the firmware version of the device

fwupdatestatus            Report device's firmware update status with node number

reboot                        Reboot the device

reset factory               Forces the unit to a factory state(except for IP Settings)

factoryfwimage            Restore device to factory firmware image

get sn                         Get device serial number

set serial                     Set serial port on or off

get baud                      Get serial port current communicate parameters

set baud                      Sets serial port communicate parameters

get key lock                 Sets serial port communicate parameters

set key lock                 Set front panel key lock level, all for lock all front panel key button, menu for only lock menu key                                    button

Network Commands

get friendly                  Get device's hostname

set friendly                  Set device's hostname

get ip                          Show the IP configuration of this device.

set ip                          Setup the IP configuration of this device.

get dns                       Get device's DNS address.

set dns                        Set device's DNS address.

renew dhcp                 Renews the DHCP lease (may cause telnet disconnection)

Security Commands

set telnet port             Sets the device's IP port listened to for Telnet connections.

set ssh port                 Sets the device's IP port listened to for SSH connections.

Configuration Commands - Input

get vidin portname       Get the name of the specified input

set vidin portname       Set the name of the specified input

get vidin hdcp              Get the HDCP mode for the specified input

set vidin hdcp              Set the HDCP mode for the specified input

get vidin res                 Get input video resolution for the specified input

get vidin edidmode       Get edid mode for the specified input

set vidin edidmode       Set edid mode for the specified input

get vidin prefedid         Get prefer resolution in the current edid used for the specified input, no matter it is under which                                    EDID mode

set vidin prefedid          Set prefer edid for the specified input

get vidin ediddata          Get current edid data used for the specified input port

set vidin ediddata          Set edid data for the specified input channel as custom edid

get vidin brightness       Get brightness setting for the specified input

set vidin brightness       Set brightness for the specified input

get vidin contrast          Get contrast setting for the specified input

set vidin contrast          Set contrast for the specified input

get vidin saturation       Get saturation setting for the specified input

set vidin saturation       Set saturation for the specified input

get vidin hue                Get hue setting for the specified input

set vidin hue                Set hue for the specified input

get vidin sharpnessh     Get sharpness h setting for the specified input

set vidin sharpnessh     Set sharpness h for the specified input

get vidin sharpnessv     Get sharpness v setting for the specified input

set vidin sharpnessv     Set sharpness v for the specified input

get vidin aspect ratio    Get aspect ratio setting for the specified input

set vidin aspect ratio    Set aspect ratio for the specified input

Configuration Commands - Output

get vidout portname     Get the name of the specified output port

set vidout portname     Set the name of the specified output port

get vidout hdcp            Get HDCP mode for the specified output

set vidout hdcp            Set HDCP mode for the specified output

get vidout res              Get video resolution for the specified output

set vidout res              Set video resolution for the specified output, It will change to manual scaling mode automatically                                     if under Auto scaling mode

get vidout scale           Get scale mode for video output

set vidout scale           Set scale mode for video output

get vidout osd             Get osd enable state for video output

set vidout osd             Set osd enable state for video output

get vidout osd color    Get osd color setting for video output

set vidout osd color     Set osd color setting for video output

get vidout osd pos       Get osd position for video output

set vidout osd pos       Set osd position for video output

get vidout cec power    Get current power status from the sink via CEC

set vidout cec power    Set power status on/off for the sink device via CEC

set vidout cec standby   Set power standby for the sink device via CEC on specified output port

set vidout cec makeactive       Make active for the sink device via CEC on specified output port

get vidout cec disp auto          Get cec display auto on/off state for specified output

set vidout cec disp auto           Set cec display auto on/off state for specified output

get vidout cec sleep timeout    Get cec display auto on/off delay time for specified output

set vidout cec sleep timeout      Set cec display auto on/off delay time for specified output

get vidout mute                        Get video mute state for specified output

set vidout mute                        Set video mute for specified output

get vidout freeze               Get video freeze state for specified output

set vidout freeze               Set vidout freeze for specified output

get vidout blank                Get video blank setting for specified output

set vidout blank                Set vidout blank setting for specified output

get vidout testpat              Get vidout test pattern setting for specified output

set vidout testpat              Set vidout test pattern setting for specified output

get vidout sleep                Get vidout tmds sleep on/off setting for specified output

set vidout sleep                Set vidout tmds sleep on/off setting for specified output

get vidout sleep delay        Get vidout tmds sleep on/off delay time setting for specified output

set vidout sleep delay         Set vidout tmds sleep on/off delay time setting for specified output

get audout mute                Get audio mute state for the specified output

set audout mute                Set audio mute for the specified output

get vidout ediddata            Get edid data for the sink on specified output

Switching Commands

load preset                        Load the specified preset mode for switcher setting

save preset                        Save current switcher setting as the specified preset mode

get preset name                 Get preset name for the specified preset mode

set preset name                 Set preset name for the specified preset mode

get switch VI                     Get which video outputs/window is switched to specified input

get switch VO                   Get which video input is switched to specified output/window

set switch VI                      Set switch video for input port to specified output/window

get switch CI                     Get which outputs is switched to specified input

get switch CO                   Get which input is switched to specified output

set switch CI                      Set switch both the audio and video input to the output port.

get switch AI                      Get which audio outputs is switched to specified audio input

get switch AO                    Get which audio input is switched to specified audio output

set switch AI                      Switch the audio channel for the specified output or window ,both HDMI Embedded audio                                           and analog audio output

Windowing Commands

get video mode                  Set video mode for video output

set video mode                  Set video mode for video output

get win select                    Get the video input to be used for the specified window

set win select                    Set the video input to be used for the specified window

get win pos x                    Get the position x(horizontal) for the specified window

set win pos x                     Set the position x(horizontal) for the specified window

get win pos y                     Get the position y(vertical) for the specified window

set win pos y                     Get the position y(vertical) for the specified window

get win size width              Get the width size for the specified window

set win size width              Set the width size for the specified window

get win size height             Get the height size for the specified window

set win size height              Set the height size for the specified window

get win priority                  Get the display layer priority for the specified window

set win priority                  Set the display layer priority for the specified window

get audout priority             Get the audio source priority state for the specified multi-view output port

set audout priority             Set audio source priority for the specified multi-view output port

get win border                   Get the border on or off for the specified window

set win border                   Get the border on or off for the specified window

get win border color          Get the border color setting for the specified window

set win border color           Set the border color setting for the specified window

get win mirror                    Get the video mirror state from selected input source for the specified window

set win mirror                    Get the video mirror on or off state from selected input source for the specified window

get win display                    Get the video display state for the specified window

set win display                    Set the video display on or off state for the specified window

reset win layout                  Reset the specified window layout of current active Video mode to default setting

Service Commands

export log file                    On/Off setting to authorize download export log files on Web Serve

get date                             Get the current date in Device

set date                             Set the current date in Device

get time                             Get the current time in Device

set time                             Set the current time in Device