Question: How do I adjust the contrast on the dbx ZonePro 640/1260/640m/1260m when I cannot view the screen Answer: Press.......

Question: Can I connect my PC directly to the ZonePro using an Ethernet cable? Answer: Ethernet devices are designed to.......

​​Question: What are the Factory Default IP settings on the ZonePro? Answer: Use the Auto/Private IP standard address 169.254.X.X  with.......

Question: What are the Factory Default settings of the serial port on the ZonrePro? Answer: · Baud Rate 57600 ·.......

Question:    Why is my ZonePRO screen either blank or too dark to read?​ Answer: Sometimes the contrast may have.......

​​​​What you will need: -  Windows computer.   -  ZonePRO GUI Designer (available for free on the dbx website).   -  Null modem/crossover.......

​​Question: How do I reset my ZonePRO 640/640m/1260/1260m? ​Answer: Hard Reset (resets everything) Power down the unit by pulling the.......

What is the Baud Rate for the RS232 Connection on the dbx ZonePro series? In order to properly connect and.......

​​​​What you will need: -  Windows computer.   -  ZonePRO GUI Designer (available for free on the dbx website).   -  Crossover Ethernet.......

Question:    How many ZonePRO's can be linked together? Answer: Three total, beyond that they will not function.​  ....

Question:    Can I use the ZonePRO Link Bus for Input Expansion? Answer: No the Link Bus is only for.......

Question:    What is the dbx ZonePRO link in/out port? Answer: · The link port is used to share up.......

Question:    How do I factory reset my ZonePRO 641/1261 and their "m" variants? Note: Confirm that the unit is.......

On the Back of the ZonePRO: Connect the mic to a balanced Euroblock input on the back of the ZonePRO........

Question:    My paging microphone or jukebox-type source keeps cutting in and out or not playing at all. Answer: If.......

I have configured the ZonePro with a Crossover but hear no difference between outputs.   When you configure a ZonePro.......

Select a ZC-4 in the ID 1 position and check “Scene".  Then click the “Edit" box.   In the Edit.......

Question:    Where can the Calibration File be obtained? Answer: No individual mic calibration test document is included or available........

Question:    Why can I not see all the controls on my screen in Zonepro GUI Designer v3.2 on Windows.......