Brands:

• AMX

Models:

Product Name:

• Master Controllers
  • NX-1200
  • NX-2200
  • NX-3200
  • NX-4200 
• Enova DVX-x2xx
• Enova DGX 8/16/32/64
• Massio Control Pads MCP-10x
• Enova DGX 800/1600/3200/6400
• DVXC DVX-2265/3266

SKU / FG #:

Downloads:

SW2106_NX-X200_Controller_v1_8_218.zip

Previous Build:

SW2106_NX-X200_Master_v1_4_90.zip

Programming Information

• Use of these new Authentication keywords requires Netlinx.axi v1.62.
• The NetLinx language supports the following new Authentication keywords:
  • TLS_CLIENT_CLOSE
  • TLS_CLIENT_OPEN
• For details on the new keywords, please see the NetLinx Language Reference Guide.

Prerequisites

• When upgrading from 1.3.106 or earlier, you must first upgrade to 1.4.90.

Revision History

• v1.8.218
  • Updated the default NTP time servers to 3 valid NIST servers.  These will update automatically if no other servers were added. If others were added, then when they are deleted, these 3 new NIST servers will appear
• v1.8.217
  • Added telnet command "sshkeygen" to genereate new ssh keys as needed
• v1.8.216
  • Fixed issue causing IP for DVX4k to not show up in the Online Tree
• v1.8.215
  •  Fixed issue causing an NX controller to lockup if the free memory dropped below a certain threshold
• v1.8.213
  •  Reinstated a previous fix from 1.8.205 for improved memory usage that was unintentionally left out of 1.8.206
  •  Added feature so that "SDAuditLog on/off" works without reboot & updated command help to remove ‘(requires reboot)’
• v1.8.211
  •  Fixed audit log issue so that after using "clear audit" the audit logging will continue
  •  Updated description to "SDAuditLog on" command to indicate a reboot is required to start logging
  •    (note: this is being changed in the next release to not require reboot)
• v1.8.210
  •  Corrected LDAP-authenticated users roles to allow execution of certain SSH CLI commands related to device security and logging
• v1.8.209
  •  Fixed issue causing an NX controller to lockup over time if there were unreachable url in its URL list
• v1.8.207
  •  Improved ssh_client open/close issues
  •  Improved duplicate ssh keys on NX to be unique on each unit
• v1.8.206
  •  Fixed issue to allow for pre-connection closure of socket without causing soft rebbot
• v1.8.205
  •  Improved SSH_CLIENT_OPEN memory usage 
• v1.8.203
  •  Modified JVM statup parameters to prevent Web Server crash due to java.lang.StackOverflowError
  •  reset factory needed for new defaults to take effect
• v1.8.202
  •  Added a check for possible issues that could cause the hs_err_pid412
• v1.8.201
  •  Added TLS_CLIENT_OPEN to support TLSv1.3
• v1.8.200 
  •  Improved memory usage on Netlinx programs
• v1.8.197  
  •  Fixed a bug with certificate loading on v1.8.195
• v1.8.196
  •  Fixed bug causing no OFFLINE event when calling IP_CLIENT_CLOSE 
• v1.8.195  
  •   upgrade openssh to “SSH-2.0-OpenSSH_9.8”
• v1.8.193  
  •   Fixed bug with URL entry when using port 1320
• v1.8.192
  •   Fixed SSH_CLIENT_OPEN/CLOSE bug
• v1.8.190 (Release)
  •  Fixed boot issue in manufacturing when using blank MSOM with 1.8.x firmware
• v1.8.187
  •   Added Telnet support for upper case icsp commands: SEND_STRING, SEND STRING, SEND_LEVEL, SEND LEVEL, SEND_COMMAND, SEND COMMAND
• v1.8.186 
  •   Fixed icsp TLS issue connections with Controller-to-Controller and Controller-to-Panel scenarios
• v1.8.184 
  •   upgrade TLSv1_2 to TLSv1_3 
• v1.8.183 (Release)
  •   Added support for new DXLink 4K60 DWP TX in Webgui of DGX and DVX4k
  •   Improved boot time to be faster (except for High Security Mode which takes a few minutes longer due to security key creation and authentication)
  •   Fixed issue with telnet URL list commands causing telnet session to lock up when deleting URL item
  •   Fixed static ip gateway persistence issue during upgrade from 1.6.x to 1.8.x firmware
  •   Fixed telnet Master to Master issue

Known Issues

• The update should take about 5 minutes after the firmware transfer has completed. If after 5 minutes you can refresh the online tree and still see the old version of firmware, then power cycle the unit to initiate/complete the update. If refreshing the online tree fails to contact the processor, please give the process a few more minutes to complete.
• If upgrading from 1.6 firmware, wpa_supplicant updates will need to be re-done
• The following RMS SDKs are not compatible with 1.5.68 and higher: RMS SDK 4.0-4.3.26, RMS SDK 4.4.* and RMS SDK 4.5.*
• When changing between the local and remote directories for user authentication, the master requires a reboot to force all currently logged in users to re-authenticate with the new service.
• SSH Key algorithm supports only ssh-rsa host key.
• ICSPMon will not work with port authentication on or telnet disabled.
• The USB host ports do not support USB hubs.
• Performing a PING to the NX master's IPv6 address may cause the NX master to reboot.
• Master web page login may get stuck in MS-IE browser on Windows8. Either use a different browser or in Internet Options->Advanced->Security Settings check "Enable Enhanced Protection Mode*" (Windows8 restart required).
• Dynamic images and listview features require v.1.4.9 G5 touch panel firmware if NX security is enabled.
• Dynamic images  will not work with G4 touch panels with NX security enabled.
• IP_MC_SERVER_OPEN command does not work on the ICSLan port.
• The DVX-x2xx Switcher (5002) requires firmware v1.7.54 or higher if authentication is enabled for AMX devices on ICSLAN or LAN Ports.
• The DGX Switcher (5002) requires firmware v3.2.10 or higher if authentication is enabled for AMX devices on ICSLAN or LAN Ports.