Enabling 70v on NCITE
Written by Gary Brindley
Updated at December 23rd, 2025
Question:
The 70/100v amplified output of the NCITE is not enabled by default, and the option to enable this output is not in an obvious location. Below are the steps for enabling this output.
Answer:
- Access the web interface of the NCITE by entering its IP address into any standard browser.
- Login with the following default username and password
- Username: administrator
- Password: password
- Click on the “Switcher" link.
- Click on the “Status Page"
- Check the box to enable 70/100v output.
