VENU360 - Multizone
Written by Carlos Mendoza
Updated at January 7th, 2026
Table of Contents
Multizone Application
This technical support guide will assist you in setting up your VENU360 for multizone outputs.
Procedure:
1. Go into CONFIG Mode by selecting the Configure button and change the router (A) on output path 1.
2. Press the Recall button to load Preset 12: Mono Full Range Main.
3. Press the CONFIG button and turn the data wheel towards the right (5 clicks) select the mid router (A) in the block diagram.
4. Press the Data wheel and scroll until you find MIX INPUTS.
5. Press the CONFIG button to apply the changes.
6. Manually increase the sliders to unity gain in each MIX module.
7. The MID mixers located on each output path provides 3 input sliders representing the 3 inputs of the venu360.
8. Sliders A and B can both be increased inside each of the 6 MIX modules located on each of the 6 output paths.
These changes can also be made using the Venu360 Control App.